Once the gas has had time to dissipate, turn the knob to “Pilot.” Then, hold down the “Reset” button and bring the flame of a long lighter close to the pilot light opening. This should light the furnace pilot light. Once you are sure the pilot light is on, release your pressure on the reset button.
Lighting a gas wall heater is a short process that may need to be done periodically.. Have a match or long lighter available to light the pilot. Find the valve located in the heater and turn it to “Pilot“. Press inward on the valve. You should hear a .
If the heater fails to light after the thermostat control knob is turned to the desired setting, check to see if the pilot is operating. If the pilot is alight, turn the control knob to a higher setting. Never drape clothing etc., Over the heater or place on a clothes horse within 2 metres. 5.